|
Auralex
U-Boat Floor Floaters (200)
Made of long-lasting
EPDM rubber, Auralex U-Boat Floor Floaters are our proprietary U-shaped
channels used to support framing members and float (isolate and decouple)
them from the surrounding structure. With the help of U-Boats, a floated
room features greatly improved transmission loss (isolation) and low frequency
definition (translated: a tight, floated room will always sound better!).
To
figure out approximately how many U-Boats to get, just multiply the total
square footage of the area you want to float by two-thirds. Auralex U-Boats
are the industry's most affordable floating solution and are much easier
to use than those exorbitant "pucks" that have been used in
the past.
Size:
2-1/8" wide x 1-1/2" high x 2" long
Thickness: sides=5/16" and base=1/2"
Box Quantity: 200 (also available
in lots of 50)
Auralex U-Boat Spacing Guidelines:
| Joist
Spacing |
U-Boat
Spacing |
| 24''
o.c. |
16''
o.c. along the joist minimum and not to exceed 24'' o.c. |
| between
12''-16'' o.c. |
16'' o.c. along the joist minimum and not to exceed 32'' o.c. |
|
Most
(>99%) of applications will work fine with 16'' o.c. spacing of U-Boats
along the joist. Spacing further apart will improve low frequency isolation
below 40 Hz. However, spacing should never exceed 32'' o.c.
*o.c. stands
for ''on center'' and represents measuring spacing from center-to-center
of, say, joists or studs (or U-Boats). This is to prevent confusion caused
by sometimes erroneously measuring from edge to edge.
Installation
Tips
Related
Items:
|